PROCESS OPTIMIZATION OF BIODIESEL PRODUCTION USING CENTRAL COMPOSITE ROTATABLE DESIGN (CCRD) MODEL BY RESPONSE SURFACE METHODOLOGY (RSM)
DOI: 10.54647/chemical53039 75 Downloads 28731 Views
Author(s)
Abstract
The study deals with the optimization, characterization and kinetic studies of biodiesel production from virgin moringa oleifera seed oil obtained from Northern Nigeria. The optimization of reaction variables was achieved through Central Composite Rotatable Design (CCRD) via Response Surface Methodology (RSM). The virgin oil was degummed prior to subjecting it for biodiesel production using methanol and sodium hydroxide. Reaction variables (reaction temperature, mole ratio, catalyst concentration and reaction time) were optimized using statistical software (Design Expert 7.0). Thirty (30) experimental runs were carried out using CCD. Optimal biodiesel yield (96.67%) was achieved at a reaction temperature, mole ratio, catalyst concentration and reaction time of 50 °C, 6:1, 0.25wt% and 60 minutes respectively. The statistical equation generated is in the form of second order polynomial with R2 value of 0.9215 which depicting 92.15% reliability of the second order polynomial equation obtained. These depicts that the experimental yields are in good agreement with predicted yields. Biodiesel fuel properties obtained showed that the density, specific gravity, viscosity, acid value, moisture content, sulphated ash, cetane number, cloud point, flash point, refractive index, distillation temperature (95 % recovery), initial boiling point and final boiling point are 0.860 gcm-3, 0.840, 4.90mm2s-1, 0.480mgKOHg-1, 0.096%, 0.020%, 44.00, -9oC, 163oC, 1.22, 330oC, 130oC, and 340oC respectively. The reaction was found to obey first order kinetics with an average rate of reaction, and activation energy of 476.00 JK-1. The biodiesel properties and the kinetic parameters obtained compare favorably with standards spectra of biodiesel from literature and ASTM standards.
Keywords
Application; Moringa Oleifera; Optimization; Analysis of variance; Kinetics
Cite this paper
Ameh, C. U., Eterigho, E. J., Musa A. A., Abdullahi M.,
PROCESS OPTIMIZATION OF BIODIESEL PRODUCTION USING CENTRAL COMPOSITE ROTATABLE DESIGN (CCRD) MODEL BY RESPONSE SURFACE METHODOLOGY (RSM)
, SCIREA Journal of Chemical Engineering.
Volume 5, Issue 1, February 2022 | PP. 23-43.
10.54647/chemical53039
References
[ 1 ] | Dainis, V. and Ligita, M. (2014). Advantages and Disadvantages of Biofuels: Observations in Latvia, Engineering for Rural Development, Jelgava, 29.-30.05.2014, Pp. 210 – 215 |
[ 2 ] | Annam, A., Joshua, D. and Sivasubramanian, S. (2012). A Study on The Optimization of Algal Biodiesel Reaction Parameters Using Response Surface Methodology, International Journal of Chemical Engineering and Applications, 3(5), pp 311- 314 |
[ 3 ] | Aransiola et. al. (2014). A Review of Current Technology for Biodiesel Production: State of the Art, Biomass and Bioenergy, 6, 276 – 297 |
[ 4 ] | Amigun, B., Musango, J. and Stafford, W. (2011) Biofuels and Sustainability in Africa, Renewable and Sustainable Energy Reviews, 15, pp1360 – 1372 |
[ 5 ] | Tess, R., Katherine, A., and Joshua, F. (2014). Sustainable Water Management in Urban, Agricultural and Natural Systems, International Journal of Water, 2(6), pp3934-3956, Available online at www.mdpi.com/journal/water, Accessed 20th November, 2016 |
[ 6 ] | Praveen, K., Vimal, C. and Mithilesh, K. (2017). Synthesis of Biodiesel from Transesterification of Jatropha Oil with Methanol using Double Metal Cyanide as Catalyst, Journal of Clean Energy Technologies, 5(1), pp1 – 11 |
[ 7 ] | Teo, S., Rashid, U. and Taufiq-Yap, Y. (2014). Biodiesel Production from Crude Jatropha Curcas Oil using Calcium based Mixed Oxide Catalysts, Fuel Journal, 136, pp244 – 252 |
[ 8 ] | Aransiola et. al. (2012). Production of Biodiesel from Crude Neem Oil Feedstock and its Emissions from Internal Combustion Engines, African Journal of Biotechnology, 11(22), pp6178 – 6186 |
[ 9 ] | Jain, S. and Sharma, M. (2010). Prospects of Biodiesel from Jatropha in India: A Review, Renewable and Sustainable Energy Reviews, 14(2), 763 – 771 |
[ 10 ] | Juan, et. al. (2011). Biodiesel Production from Jatropha Oil by Catalytic and Non-Catalytic Approaches: An Overview, Bioresources Technology, 102(2), pp452 – 460 |
[ 11 ] | Kiss, A., Dimian, A. and Rothenberg, G (2008). Biodiesel by Catalytic reactive distillation powered by metal oxides. Energy Fuel, 22(1), pp598 – 604 |
[ 12 ] | Kafuku, G. and Mbarawa, M. (2013). Influence of Fatty Acid Profiles during Supercritical Transesterification of Conventional and Non-Conventional Feedstocks: A Review, American Journal of Analytical Chemistry, 4, 469–475, Available online at http://dx.doi.org/10.4236/ajac.2013.49060. |
[ 13 ] | Deng X., Zhao L.-C. and He Y. (2012). Response Surface Modelling and Optimization of Accelerated Solvent Extraction of Four Lignans from Fructus Schisandrae. Molecules, 17(4), pp. 3618–3629. |
[ 14 ] | Oyerinde, A. and Bello, E. (2016). Use of Fourier Transformation Infrared (FTIR) Spectroscopy for Analysis of Functional Groups in Peanut Oil Biodiesel and Its Blends, British Journal of Applied Science & Technology,13(3), pp1-14 |
[ 15 ] | Radha, K. and Manikandan, G. (2011). Novel Production of Biofuels from Neem Oil, World Renewable Energy Congress, 471 – 478 |
[ 16 ] | Ibeto, C., Ofoefule, N. and Ezeugwu, H. (2011). Fuel Quality Assessment of Biodiesel Produced from Groundnut Oil and its Blend with Petroleum Diesel. American Journal of Food Technology 6(9), pp798 – 803 |
[ 17 ] | Ahmed, I., Ayman, A., Mohamed, A. and Ahmed, M. (2016). Biodiesel Production by Aspergillus niger Lipase Immobilized on Barium Ferrite Magnetic Nanoparticles, Journal of Bioengineering, 3(14), pp1 – 15 |
[ 18 ] | Leung, D., Wu, X. and Leung, M. (2011). A Review on Biodiesel Production using Catalyzed Transesterification, Journal of Applied Energy, 87(4), pp1083 – 1095 |
[ 19 ] | Dharmesh-Kumar, N. and Math, M. (2016). Application of Response Surface Methodology for Optimization of Biodiesel Production by Transesterification of Animal Fat with Methanol, International Journal of Renewable Energy, 6(1), pp74 – 79 |
[ 20 ] | Sharma, Y., Bhaskar, S. and John, K. (2010). Application of an Efficient Non-conventional Heterogeneous Catalyst for Biodiesel Synthesis from Pongamia pinnata Oil, Energy Fuels, 3(8), pp3223 – 3231 |
[ 21 ] | Alhassan, Y., Kumar, N., Bugaje, I. and Mishra, C. (2014). Optimization of Gossypium arboreum Seed Oil Biodiesel Production by Central Composite Rotatable Model of Response Surface Methodology and Evaluation of its Fuel Properties, Journal of Petroleum Technology and Alternative Fuels, 5(1), pp1 – 12 |
[ 22 ] | Goyal, P., Sharma, M. and Jain, S. (2013). Optimization of Transesterification of Jatropha Curcas Oil to Biodiesel using Response Surface Methodology and its Adulteration with Kerosene, Journal of Material and Environmental Science, 4(2), 277 - 284 |
[ 23 ] | Wan-Omar, W., Noordin, N., Mohammed, M. and Amin, N. (2009). A Two-Step Biodiesel Production from Waste Cooking Oil: Optimization of Pre-treatment Step, Journal of Applied Sciences, 9(17), 3098 – 3103 |
[ 24 ] | Subhalaxmi, P., Madankar, C., Pravakar, M. and Naik, S. (2012). Optimization of Reactive Extraction of Castor Seed to Produce Biodiesel using Response Surface Methodology, Elsevier Journal of Fuel, 97, pp848 – 855 |
[ 25 ] | Xiaohu, F., Xi, W. and Feng, C. (2011). Biodiesel Production from Crude Cottonseed Oil: An Optimization Process Using Response Surface Methodology, Journal of Open Fuels Energy Science, 4, 1 – 8 |
[ 26 ] | Noordin, M., Venkatesh, V., Elting, S. and Abdullah, A. (2004). Application of Response Surface Methodology in Describing the Performance of Coated Carbide Tools when Turning AISI 1045 Steel, Journal of Material Proc. Technol., 145l, pp46 – 58 |
[ 27 ] | Basri, M., Rahman, N., Ebrahimpour, A., Salleh, A., Gunawan, E. and Basyyaruddin, M. (2007). Comparison of Estimation Capabilities of Response Surface Methodology (RSM) with Artificial Neutral network (ANN) in Lipase-Catalysed Synthesis of Palm-Based Wax Ester, BMC Biotechnology. 7(53), pp1 – 14 |
[ 28 ] | Roseli, A., Anna, L., Turtelli, P., and Kil, J. (2011). Biodiesel Production and Quality, Food Technology Institute and Campinas State University, Brazil |